Irrigation | Capillary tube distributor
-
Vendor:Irritec
Irritec Spin 4-piece, straight needle
Four direct irrigation needles for Irritec. The Waterspin divides the water into 4 tubes, each tube being supplied with the same water inlet via a labyrinth connector. Compatible with CNL and DCS valves and 4-6 mm capillaries. Suitable for filters with a permeability of...- €2,26
€2,38- €2,26
- Unit price
- per
-
Vendor:Aquaking
Kapilára CNL 4-6 mm - ROLE 100 m
Kapilára slouží jako rozvod živného roztoku až k Vaší rostlině. Celá role: 100m Kapilára slouží jako rozvod živného roztoku až k Vaší rostlině. Celá role: 100 m.Vhodný děrovací nástroj/děrovač 2,5/2,7 a 3,0 mm ( při použití ventilu). Vhodné pro filtry s průchodností ok 155,...- €45,15
€47,52- €45,15
- Unit price
- per
-
Vendor:Irritec
capillary connector 5 mm, type I
Connector per capiláru 5 mm, type I spojka. Connector per capiláru 5 mm, type I spojka.- €0,34
€0,36- €0,34
- Unit price
- per
-
Vendor:Ostatní
Distribution box with microcapillary - 12 conductors
Practical irrigation distributor with microcapillary for 12 lines. Practical irrigation distributor with microcapillary for 12 lines.- €10,72
€11,29- €10,72
- Unit price
- per
-
Vendor:Irritec
Irritec end post H-profile 45° - knurled connector
If you want to use it, you should use a 5mm cap and a 45° angle. Maximum pressure: 0.5 - 1.5 bar. If you want to use it, you should use a 5mm cap and a 45° angle. Maximum pressure: 0.5 - 1.5 bar.- €0,33
€0,36- €0,33
- Unit price
- per
-
Vendor:Aquaking
Topspin for 12 plants, 20 mm
The Topspin 12 - 45° needle connection - connection 20 RS is used for even distribution of the fertilizer solution in 12 places at the same time without the need for a pressure pump. It is not a pressure irrigation! The EASY RS system...- €31,23
€32,87- €31,23
- Unit price
- per
-
Vendor:Netafim
Microcolumn 3.2 mm, 1 mm hole, cut in 120 cm steps
120 cm long plastic microcapillaries for irrigation and plant cultivation indoors and outdoors. 120 cm long plastic microcapillaries for irrigation and plant cultivation indoors and outdoors.- €0,23
€0,24- €0,23
- Unit price
- per
-
Vendor:Netafim
Microcolumn 3.2 mm, 0.8 mm hole, cut in 100 cm steps
100 cm long plastic microcapillaries for irrigation and plant cultivation indoors and outdoors. 100 cm long plastic microcapillaries for irrigation and plant cultivation indoors and outdoors.- €0,18
€0,20- €0,18
- Unit price
- per
-
Vendor:Aquaking
Capillary needle straight CNL 4-6 mm
Straight capillary needle with labyrinth suitable for connecting the capillary tube to the pressure DSC valve. The valve connects the capillary to the distribution hose. The capillary is straight and is suitable for connecting the capillary to the pressure DSC valve. The valve connects...- €0,44
- €0,44
- Unit price
- per
-
Vendor:Aquaking
Capillary 4/6 mm - 1 m (1 pc)
Capillary distributes nutrient solution. This product is one meter long and already cut capillary. The capillary distributes the nutrient solution. This product is a 1 meter long, already cut capillary. Suitable hole tool / hole punch 2.5 / 2.7 and 3.0 mm (when using...- €0,63
- €0,63
- Unit price
- per
-
Vendor:Irritec
Irritec Topspin 12 drip posts 45°, ⌀ 25 mm
Topspin consists of 12 separate pressure equalization valves without a check valve, mounted on a T-piece. Topspin has all the advantages and disadvantages of a separate valve. Topspin consists of 12 individual pressure balanced valves without check valves mounted on a T-piece. Topspin has...- €30,02
€31,60- €30,02
- Unit price
- per
-
Vendor:Irritec
Irritec Spin 8-piece, 8l
Pre-assembly set with 8 labyrinth plugs, 8 hoses with a length of 1 m and 1 compensation valve. Suitable hole tool 2.5/2.7 mm. Suitable for filters with a permeability of approx. 155, mU100 or 0.1 mm. Pre-assembled set with 8 labyrinth plugs, 8 hoses...- €10,57
- €10,57
- Unit price
- per
-
Vendor:Irritec
Irritec Spin 4-piece, 45° needle
Four plastic needles and hoses are designed for watering plants. Compatible with CNL and DCS valves. Suitable for filters with a permeability of approximately 155, mU100 or 0.1 mm. Four plastic needles and hoses are designed for watering plants. They are compatible with CNL...- €3,57
€3,76- €3,57
- Unit price
- per
-
Vendor:Irritec
Irritec end post * 45° profile
Conical needle for capillary irrigation, inclination 45°. Conical plastic needle for capillary irrigation. Inclination 45°.- €0,26
€0,28- €0,26
- Unit price
- per
