Malapa distribution board 6+2 (400V) controlled by KL03 timer

KL03 Distributor 6+2 (400V) The wall distributors from the KL series are designed for power supply and switching of electrical devices. They supply and switch inductive and resistive loads. KL03 Distributor 6+2 (400V) The wall distributors of the KL series are designed for powering and switching electrical devices. They supply and switch inductive and resistive loads. They are used, for example, in lighting control or for greenhouse lighting, pumps, sewage pump motors, advertising boards, heaters, heating devices and many other regular activities. The switching on and off of the sockets is controlled by a power relay and is designed for the switched power of the distributor. A maximum of 1200W inductive or 2500W resistive load can be connected to each socket. The distributor has integrated fire protection and forces the switched sockets to be switched off. The timer has an emergency power supply of 200 hours to ensure operation even in the event of a power failure. The timer is programmed by pulling out the plug and inserting the discs along the dial to switch it off. The distributor can also be switched manually. Advantages - The timer does not react to electromagnetic waves or induction fields. Designation of sockets - Switched sockets - 6 single-phase sockets, controlled by timers (ballast - max 12x 600W) Unswitched sockets - 2 single-phase sockets under continuous current. Technical data KL03 - Power supply - 400V AC 50Hz, supply cable with plug 16A/5-pin 5m, max. load - 3x 3500 W (3x 16A), max. per socket - 1200W inductive load, 2500W resistive load, protection class IP43, environment - normal, ambient temperature - +40°C to -10°C. Total weight - 3045g, dimensions - length 225, width 180, height 100mm, housing - ABS, 2 year guarantee.

Title	Default Title