Ebb&Flow adhesive for soaking tubs, 300 ml

High quality adhesive specifically for Ebb&Flow bathtubs. Volume 300 ml. Excessive use of the adhesive can damage the tubs.

terms and conditions
The bonding must be done:

• At temperatures between 5-25 °C
• The containers must be dry and stored dry during the curing process.

support for table container

• The trays are designed to support a maximum evenly distributed load of 70 kg/m2.
• The following criteria must be met:
• The storage tables must be supported at a distance of up to 500 mm.
• The support should be less than 70 mm from the edge of the adhesive.
• The support should be less than 200 mm from the edge of the bench's container. Note that the tub must not rest on the support bar.
• NOTE: The support MUST be placed under the part of the tub that contains the adhesive edge (see drawing).